Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Alpine, UT

Sidewalk & Walkway Cleaning for Pavers in Alpine, UT

Pressure wash with a surface cleaner for pavers. Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime. Typical cost $100-$250.

Looking for sidewalk & walkway cleaning for pavers in Alpine, UT? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. On pavers, the method we use is pressure wash with a surface cleaner.

Method and pressure

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Cleaning pavers safely

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

When to book sidewalk & walkway cleaning for pavers

  • Slippery paths after rain
  • Green or black growth along shaded edges
  • Gum, leaf stains or rust spots
  • Uneven, blotchy color

Where the grime comes from

  • Shade and moisture along the house
  • Foot traffic and dropped food or gum
  • Leaves and berries that stain
  • Sprinkler overspray

What you can do yourself

  • Sweep away leaves before they stain
  • Scrub small slippery patches with a stiff brush and a deck or patio cleaner
  • Trim plants that keep paths shaded and damp

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Slipping on wet, treated surfaces
  • Water and debris sprayed onto doors, windows and cars
  • Lifting loose joint material between slabs

How we handle sidewalk & walkway cleaning for pavers

  1. Sweep and inspect
  2. Pre-treat growth and stains
  3. Clean with a surface cleaner
  4. Detail edges and steps
  5. Rinse and post-treat

Sidewalk & Walkway Cleaning for Pavers cost in Alpine, UT

$100-$250Typical range for a typical front walk and side paths
About 1 hourTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Serving Alpine, UT and nearby towns

Snow, deicing salt and freeze-thaw cycles wear Utah concrete. Cleaning it in spring and sealing it in late summer helps prevent surface flaking.

Some cities in Utah limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We provide sidewalk & walkway cleaning for pavers across Alpine (ZIP code 84004) and nearby towns including Highland (2.1 mi), Cedar Hills (2.9 mi), American Fork (5.4 mi) and Lehi (5.7 mi). Call (555) 010-0000 for a free quote in Alpine.

Sidewalk & Walkway Cleaning for Pavers: frequently asked questions

How much does sidewalk & walkway cleaning for pavers cost in Alpine, UT?

Sidewalk & Walkway Cleaning for Pavers typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for sidewalk & walkway cleaning for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is sidewalk & walkway cleaning for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule sidewalk & walkway cleaning for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Alpine, UT

HOA & Apartment Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $800-$5,000

Gutter Brightening

Cleaning the outside face of gutters to remove the black 'tiger stripes' that ordinary washing leaves behind.

Typical $150-$400

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

Driveway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Driveway Cleaning

Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish.

Typical $150-$400

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Oil Stain Removal for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $100-$300

Efflorescence Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$600

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

Parking Lot & Garage Cleaning for Asphalt

Low-to-moderate pressure wash. Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure.

Typical $500-$3,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Alpine, UT. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote